Skip to content
Ruitus Logo Ruitus

RTO Rotary Joint for CFB Boiler Slag Cooling Systems


Purpose-built for high-pressure condensate cooling in large CFB units

Overview


CFB boiler slag cooling systems use circulating water below 1.8 MPa or high-pressure condensate from heat recovery systems at 2.5–4.0 MPa with much higher flow demand. The RTO rotary joint was developed specifically for this condensate duty, rated at 5.0 MPa and 100°C with DN100-65 to DN200-125 bores, and has proven stable and long-lived across CFB power plants.

Images & Dimension Drawings


RTO Rotary Joint for CFB Boiler Slag Cooling Systems — drawing
RTO Rotary Joint for CFB Boiler Slag Cooling Systems — drawing
RTO Rotary Joint for CFB Boiler Slag Cooling Systems — drawing
RTO Rotary Joint for CFB Boiler Slag Cooling Systems — drawing
RTO Rotary Joint for CFB Boiler Slag Cooling Systems — drawing

Key Features


  • Rated 5.0 MPa for high-pressure condensate circuits
  • Large bores DN100-65 to DN200-125 for high flow capacity
  • Speed range 20–30 rpm matched to slag cooler duty
  • Proven long service life in CFB power plant operation

Typical Applications


CFB boiler slag cooling systems
Condensate heat recovery circuits in power plants
Large-scale circulating fluidized bed boiler units

Operating Conditions


Media Industrial water, condensate
Max Pressure 5.0 MPa
Max Temperature 100°C
Speed Range 20 – 30 rpm (varies by bore size)
Notes Bore sizes: DN100-65, DN125-80, DN150-100, DN200-125. Installation drawings available on request.

Frequently Asked Questions


1 What is the RTO rotary joint for CFB boiler slag cooling, and how do I choose one?
The RTO is built for the high-pressure condensate circuits of CFB slag coolers: rated 5.0 MPa / 100°C, bores DN100-65 to DN200-125, speed 20–30 rpm. If the circuit runs on ordinary circulating water below 1.8 MPa, the standard RTH type is sufficient — choose the RTO for heat-recovery condensate at 2.5–4.0 MPa with high flow demand.
2 Can the RTO be matched to our existing slag cooler interface?
Yes — the four standard bores (DN100-65, DN125-80, DN150-100, DN200-125) cover most slag cooler lines, and installation drawings are available on request. Send a photo of the nameplate plus the mounting dimensions (bore, flange, thread) and we will confirm interchangeability within 24 hours.
Get in Touch

Send Us Your Drawing or Duty Conditions


Tell us the medium, temperature, pressure, speed and connection size. Our engineers reply with a selection or a custom proposal — usually within one working day.